This robust silicone O-ring, reinforced with nylon for enhanced durability, provides exceptional sealing in demanding industrial environments. Its material composition ensures excellent resistance to a wide range of chemicals and extreme temperatures.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.472" |
| Outside Diameter | 2.008" |
| Cross Section | 0.231" |
A high-performance industrial component, this silicone O-ring exhibits superior resilience and a broad operational temperature range, typically from -50°C to +200°C, making it suitable for extreme conditions. The integral nylon reinforcement significantly increases its tensile strength and resistance to abrasion and extrusion, preventing premature failure under high pressure or mechanical stress. With a precise Inside Diameter of 1.472 inches, an Outside Diameter of 2.008 inches, and a Cross Section of 0.231 inches, it ensures a tight, leak-proof seal in critical applications within the automotive, aerospace, and food processing industries, where chemical inertness and reliable performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the sealing groove and mating surfaces for cleanliness and damage. Ensure they are free of debris, oil, or any foreign material. 2. Carefully stretch and place the O-ring into the groove, ensuring it lies flat and is not twisted. Avoid using sharp tools that could nick or cut the material. 3. Verify proper seating of the O-ring before assembling the mating component. Apply a light coat of compatible lubricant if recommended for the specific application to aid installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or stretching of the O-ring. | Handle the O-ring with care and avoid sharp objects. If lubrication is needed, use a compatible, non-petroleum-based lubricant suitable for silicone. |
| Installing the O-ring in a contaminated groove or on rough surfaces. | Thoroughly clean all sealing surfaces and the O-ring groove before installation. Ensure the surfaces are smooth and free of any imperfections. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: High-temperature fluid and gas sealing, Chemical processing equipment, Automotive and aerospace seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||