This industrial-grade silicone O-ring offers superior sealing performance across a wide temperature range. Its robust construction ensures reliability in critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 2.289" |
| Outside Diameter | 5.346" |
| Cross Section | 0.079" |
Precision-manufactured to tight tolerances, this silicone O-ring features an Inside Diameter of 2.289 inches, an Outside Diameter of 5.346 inches, and a Cross Section of 0.079 inches. Silicone's inherent properties of excellent flexibility, high-temperature resistance (up to 450°F or 232°C), and good low-temperature performance (down to -100°F or -73°C) make it ideal for applications involving food and beverage processing, medical devices, and aerospace components where purity and resilience are paramount. Its resistance to ozone, UV, and weathering further enhances its suitability for outdoor or exposed environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove and sealing surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Position the O-ring squarely within its designated groove to prevent twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to stretching or tearing. | Apply gentle, even pressure. For tight fits, consider using a lubricant compatible with silicone and the application. |
| O-ring twisting in the groove, compromising the seal. | Ensure the O-ring is seated flat and square within the groove before assembly; avoid rotating the O-ring during installation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Machinery, Aerospace and Automotive Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||