This industrial-grade silicone O-ring, featuring brass construction, provides superior sealing in demanding environments. Its precise dimensions ensure a reliable fit for critical fluid and gas containment.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.372" |
| Outside Diameter | 10.790" |
| Cross Section | 0.083" |
Engineered for reliability and performance, this silicone O-ring boasts a precise inside diameter of 9.372 inches and an outside diameter of 10.790 inches, with a 0.083-inch cross-section. The silicone material offers excellent flexibility, high and low-temperature resistance, and good chemical inertness, making it suitable for a wide range of industrial applications. The integrated brass component enhances its structural integrity and may offer specific compatibility benefits in certain corrosive or high-pressure systems. This combination ensures robust sealing against leaks in critical machinery and process equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris. 2. Carefully place the O-ring into the designated groove, avoiding excessive stretching or twisting. 3. Verify proper seating and compression of the O-ring within the groove before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to over-compression and premature failure of the O-ring. | Adhere to specified torque values during assembly to prevent excessive compression. |
| Using incompatible cleaning agents that can degrade the silicone material. | Consult chemical resistance charts or use only approved, mild cleaning solutions. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive and aerospace sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||