This industrial-grade O-ring features a silicone elastomer reinforced with nylon for enhanced strength and durability. It provides reliable sealing in demanding environments, resisting extreme temperatures and a broad spectrum of chemicals.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 1.787" |
| Outside Diameter | 7.496" |
| Cross Section | 0.142" |
Manufactured under strict quality controls, this silicone O-ring boasts a precise inside diameter of 1.787 inches, an outside diameter of 7.496 inches, and a cross-section of 0.142 inches. The inherent flexibility and wide temperature range (-55°C to +230°C) of silicone, combined with the improved tensile strength and abrasion resistance imparted by the nylon reinforcement, make it ideal for applications requiring robust sealing against aggressive media and high pressures. Its excellent dielectric properties and resistance to ozone and UV degradation further enhance its utility in specialized industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Lightly lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into its designated groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to compression set. | Apply only the necessary force to seat the O-ring. Consult application-specific torque specifications if available. |
| Using incompatible lubricants or cleaning agents. | Always verify lubricant and cleaning agent compatibility with silicone elastomers to prevent material degradation. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: High-temperature sealing in ovens and kilns, Automotive engine and transmission seals, Aerospace fluid and fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||