This industrial-grade Silicone O-ring provides superior sealing performance in extreme temperatures and harsh environments. Engineered for precise fit and long-term reliability in critical applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 1.611" |
| Outside Diameter | 8.033" |
| Cross Section | 0.267" |
Specified by design engineers worldwide, this Silicone O-ring (AS568-364 equivalent) boasts an inside diameter of 1.611 inches and an outside diameter of 8.033 inches, with a robust 0.267-inch cross-section. Fabricated from high-purity silicone rubber, it offers exceptional flexibility, UV resistance, and a wide operating temperature range, making it ideal for static and dynamic sealing in food processing, medical devices, and automotive systems where chemical inertness and biocompatibility are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Lightly lubricate the O-ring with a compatible lubricant to prevent tearing during installation. 3. Carefully insert the O-ring into the designated groove, ensuring it is seated evenly and without twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply a thin layer of compatible lubricant and use gentle, even pressure to seat the O-ring. |
| Incorrect O-ring size for the application groove, causing leaks or premature failure. | Verify O-ring dimensions (ID, OD, CS) against the groove specifications and a reliable O-ring sizing chart. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Device Sealing, Automotive Systems (e.g., seals for fluid reservoirs), Aerospace Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||