This industrial Silicone O-ring provides reliable sealing in critical applications. Its robust construction ensures excellent flexibility and resistance to extreme temperatures, guaranteeing long-term performance in demanding environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.501" |
| Outside Diameter | 1.819" |
| Cross Section | 0.180" |
Built to exacting engineering tolerances, this Silicone O-ring boasts an Inside Diameter of 0.501 inches, an Outside Diameter of 1.819 inches, and a Cross Section of 0.180 inches. Formulated from high-grade silicone, it exhibits exceptional resilience across a wide temperature range (-60°C to 200°C) and superior resistance to ozone, UV radiation, and weathering. Its inherent flexibility allows for excellent conformability, ensuring a tight seal against contaminants and leakage in dynamic and static applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Seat the O-ring fully within the groove to achieve optimal compression and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lubricant incompatible with silicone. | Employ only silicone-based lubricants or ensure no lubricant is used if the application environment is sensitive. |
| Over-stretching or twisting the O-ring during installation. | Gently guide the O-ring into place, using a slight rotation if necessary, to prevent permanent deformation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Aerospace fluid systems, Medical device seals, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||