This industrial-grade Silicone O-ring offers exceptional sealing capabilities. Its robust construction ensures a tight, leak-proof seal in demanding environments, making it ideal for critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.267" |
| Outside Diameter | 6.041" |
| Cross Section | 0.199" |
Engineered for reliability and performance, this Silicone O-ring is precisely manufactured to meet stringent industrial standards. With an Inside Diameter (ID) of 1.267 inches, an Outside Diameter (OD) of 6.041 inches, and a Cross Section (CS) of 0.199 inches, it provides a superior seal. Silicone's inherent properties, including excellent temperature resistance across a wide range (-60°C to 200°C), flexibility, and resistance to UV and ozone, make this O-ring suitable for food-grade applications, medical devices, and general industrial sealing where purity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant. 3. Position the O-ring in the groove, ensuring it is not twisted or pinched during installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring. | Always verify the required O-ring dimensions against the groove specifications. |
| Over-stretching or compressing the O-ring during installation. | Handle the O-ring with care and avoid excessive force to prevent damage. |
| Using incompatible lubricants or cleaning agents. | Consult material compatibility charts to select lubricants and cleaning agents suitable for silicone. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Automotive gaskets, Food and beverage processing equipment, Medical device seals, Aerospace components, General industrial fluid sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||