This industrial-grade silicone O-ring provides superior sealing in challenging environments. Engineered for resilience, it offers excellent resistance to temperature extremes and a wide range of chemicals, ensuring reliable performance in critical applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.820" |
| Outside Diameter | 6.223" |
| Cross Section | 0.125" |
A high-performance industrial component, this silicone O-ring is meticulously manufactured to precise tolerances. With an Inside Diameter (ID) of 0.820 inches, an Outside Diameter (OD) of 6.223 inches, and a Cross Section (CS) of 0.125 inches, it guarantees a secure and leak-proof seal. The inherent properties of silicone rubber, such as its exceptional thermal stability (operating range from -60°C to 230°C) and resistance to ozone, UV, and weathering, make it ideal for applications in food processing, medical devices, and general industrial machinery where hygiene and inertness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully place the O-ring into its designated groove, avoiding stretching or twisting. 3. Apply gentle, even pressure to seat the O-ring fully, confirming a snug fit before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, compressing the O-ring beyond its elastic limit. | Adhere to specified torque values for fasteners to prevent premature O-ring failure. |
| Using an O-ring of the incorrect size or material for the application. | Verify O-ring specifications against system requirements and consult material compatibility charts. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Automotive fluid systems, Pharmaceutical equipment, Aerospace sealing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||