This industrial Silicone O-Ring provides superior sealing performance across a wide temperature range and in challenging chemical environments. Engineered for reliability, it ensures leak-free operation in critical fluid and gas systems.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 0.729" |
| Outside Diameter | 4.692" |
| Cross Section | 0.180" |
Trusted by engineers across multiple sectors, this Silicone O-Ring boasts precise dimensions of 0.729" inside diameter, 4.692" outside diameter, and a 0.180" cross-section. Its inherent material properties include excellent flexibility at low temperatures, stability at high temperatures (up to 200°C), and resistance to ozone, UV radiation, and certain chemicals. These attributes make it an ideal sealing solution for demanding environments in the food and beverage, medical, automotive, and aerospace industries, ensuring long-term integrity and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove and mating surfaces are clean and free of debris. 2. Lubricate the O-ring lightly with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, to ensure proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to stretching or tearing of the O-ring. | Apply gentle, even pressure during installation. Utilize O-ring installation tools if necessary to prevent damage. |
| Incorrectly sizing the O-ring for the groove, resulting in improper compression or extrusion. | Verify O-ring dimensions against groove specifications and consult relevant sealing design standards before selecting. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature sealing in ovens and kilns, Food and beverage processing equipment gaskets, Medical device seals requiring biocompatibility and sterilization resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||