This industrial silicone O-ring, constructed with an Aluminum 6061 core, delivers exceptional sealing performance. Its precise dimensions ensure a reliable barrier against fluids and gases across a wide temperature range.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 0.370" |
| Outside Diameter | 3.035" |
| Cross Section | 0.155" |
Built to exacting engineering tolerances, this industrial O-ring features an Inside Diameter of 0.370 inches, an Outside Diameter of 3.035 inches, and a Cross Section of 0.155 inches. The Aluminum 6061 core provides structural integrity and excellent thermal conductivity, making it suitable for applications requiring rapid temperature cycling. The high-grade silicone elastomer offers superior flexibility, resistance to extreme temperatures (-60°C to 230°C), UV radiation, ozone, and a broad spectrum of chemicals, ensuring long-term sealing integrity in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the mating groove and surfaces for cleanliness and damage. 2. Lubricate the O-ring and groove with a compatible lubricant if recommended for the application. 3. Carefully place the O-ring into the groove, ensuring it is seated evenly without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant or no lubricant at all. | Always consult compatibility charts for lubricants. Use a lubricant recommended for silicone O-rings and the specific application to prevent material degradation and facilitate installation. |
| Stretching the O-ring too much during installation. | Install the O-ring without excessive stretching. Overstretching can permanently deform the O-ring, leading to premature failure and leakage. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: High-temperature sealing in automotive and aerospace, Chemical processing equipment, Food and beverage industry equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||