This industrial silicone O-ring provides reliable sealing in critical applications. Its robust material composition ensures longevity and performance across a wide temperature range.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 0.140" |
| Outside Diameter | 1.931" |
| Cross Section | 0.155" |
Precision-manufactured to tight tolerances, this silicone O-ring features an inside diameter of 0.140 inches, an outside diameter of 1.931 inches, and a cross-section of 0.155 inches. Composed of high-grade silicone rubber, it exhibits exceptional flexibility, resilience, and resistance to extreme temperatures (typically -60°C to +230°C), UV radiation, and ozone. Its inert nature makes it suitable for food-grade and medical applications where purity is paramount. The material's inherent low compression set ensures a consistent seal over extended periods, minimizing maintenance and downtime in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of debris. 2. Carefully stretch the O-ring over the smaller diameter of the mating part, or compress it into the groove. 3. Verify the O-ring is properly seated and not twisted or pinched before assembly completion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to premature wear or damage. | Apply only sufficient pressure to seat the O-ring; avoid excessive force. |
| Using incompatible lubricants or cleaning agents that degrade silicone. | Consult the material compatibility chart for approved lubricants and cleaning solutions for silicone. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Production, Aerospace and Automotive Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||