This industrial-grade Silicone O-ring, constructed from a durable Nylon material, provides exceptional sealing integrity. Its precise dimensions ensure a secure fit in critical applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.463" |
| Outside Diameter | 7.232" |
| Cross Section | 0.189" |
Engineered for reliability and performance, this industrial O-ring boasts an Inside Diameter of 9.463 inches, an Outside Diameter of 7.232 inches, and a Cross Section of 0.189 inches. The robust Nylon material offers excellent tensile strength and abrasion resistance, making it suitable for a wide range of demanding environments. Its design prioritizes leak prevention and component protection in high-pressure and dynamic sealing scenarios. Ideal for fluid power systems, automotive applications, and industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component or into the groove, avoiding nicks or cuts. 3. Verify proper seating and compression of the O-ring before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtretching or twisting the O-ring during installation. | Gently work the O-ring into place, ensuring it sits flat and without twists to maintain sealing integrity. |
| Using an O-ring with incorrect dimensions for the groove. | Always confirm the O-ring's ID, OD, and CS match the specified groove dimensions for optimal performance and longevity. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic and Pneumatic Systems, Automotive Engine Components, Industrial Machinery Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||