This industrial-grade silicone O-ring offers superior sealing capabilities. Its robust construction ensures a reliable barrier against fluids and gases in a wide range of operating conditions.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.947" |
| Outside Diameter | 9.916" |
| Cross Section | 0.217" |
Engineered for reliability and performance, this industrial O-ring is manufactured from high-quality silicone, renowned for its excellent flexibility, temperature resistance, and chemical inertness. With a precise inside diameter of 9.947 inches, an outside diameter of 9.916 inches, and a substantial cross-section of 0.217 inches, this seal is designed to maintain its integrity under pressure and extreme temperatures, preventing leaks in critical systems. Its material properties make it suitable for food-grade applications, medical devices, and environments requiring non-toxic, low-outgassing seals.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force. 3. Seat the O-ring fully within its groove, verifying proper fit and compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtensioning during installation, leading to permanent deformation. | Apply gentle, even pressure when installing. Use appropriate tools if necessary to avoid stretching beyond its elastic limit. |
| Using an O-ring with incompatible material for the fluid media. | Always verify the chemical compatibility of silicone with the specific fluids or gases it will be exposed to. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Equipment, High-Temperature Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||