Engineered for reliable sealing in demanding industrial applications, this Silicone O-Ring offers exceptional resilience. Its precise dimensions ensure a secure fit, providing robust protection against leaks in critical systems.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 8.630" |
| Outside Diameter | 9.506" |
| Cross Section | 0.122" |
A proven choice for industrial professionals, this Silicone O-Ring features a precise Inside Diameter (ID) of 8.630 inches and an Outside Diameter (OD) of 9.506 inches, with a Cross Section (CS) of 0.122 inches. Fabricated from high-grade silicone rubber, it exhibits superior flexibility, excellent resistance to extreme temperatures (both high and low), UV radiation, and ozone. These properties make it an ideal sealing solution for applications in the food and beverage, pharmaceutical, automotive, and aerospace industries where purity and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of debris or sharp edges. 2. Carefully stretch the O-ring over the smallest diameter of the assembly or into the groove, avoiding excessive force or stretching. 3. Once seated, check for proper alignment and compression to confirm a complete seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or overstretching the O-ring during installation. | Install the O-ring with just enough tension to seat it properly. Avoid pulling or stretching it beyond its elastic limit. |
| Using a contaminated or damaged O-ring. | Always inspect the O-ring for nicks, cuts, or foreign material before installation. Ensure the installation environment is clean. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature sealing in ovens and dryers, Food and beverage processing equipment, Medical and pharmaceutical devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||