This industrial-grade silicone O-ring provides superior sealing performance in challenging environments. Its flexible yet durable nature ensures a tight seal against various media and temperatures.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.402" |
| Outside Diameter | 10.038" |
| Cross Section | 0.128" |
Manufactured under strict quality controls, this silicone O-ring exhibits exceptional resilience and a wide operating temperature range, ideal for food-grade, medical, and high-temperature applications. With an Inside Diameter of 7.402 inches, an Outside Diameter of 10.038 inches, and a Cross Section of 0.128 inches, it offers precise dimensional stability. Silicone's inherent properties, including excellent resistance to ozone, UV, and weathering, make it a preferred choice for static and dynamic sealing where longevity and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of burrs or damage. 2. Carefully stretch the O-ring over the component, avoiding excessive force or twisting. 3. Seat the O-ring fully within the groove to achieve uniform compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to excessive compression and premature failure of the O-ring. | Tighten fasteners to the manufacturer's recommended torque specifications to ensure proper sealing without overstressing the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade the silicone material. | Refer to the material compatibility chart and use only silicone-compatible lubricants and cleaning agents. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Equipment, High-Temperature Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||