This industrial-grade Silicone O-Ring offers exceptional resilience and temperature resistance. Engineered for reliable sealing in diverse industrial environments, it ensures leak-free performance under pressure.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.285" |
| Outside Diameter | 3.692" |
| Cross Section | 0.185" |
A proven choice for industrial professionals, this Silicone O-Ring features a precise Inside Diameter of 6.285 inches, an Outside Diameter of 3.692 inches, and a robust Cross Section of 0.185 inches. Constructed from high-quality polycarbonate, it exhibits excellent flexibility, superior resistance to extreme temperatures (both high and low), and notable durability against many chemicals. Its inherent material properties make it ideal for applications requiring a consistent and reliable seal in rigorous operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully position the O-ring into the designated groove, avoiding stretching or twisting. 3. Apply light lubricant if necessary, ensuring compatibility with the O-ring material and sealing environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring deformation or damage. | Apply gentle pressure and use appropriate tools to guide the O-ring into its groove, ensuring it sits flush without stretching. |
| Incorrect O-ring size selection for the application, resulting in leaks or premature failure. | Verify all dimensional specifications (ID, OD, CS) against the groove and mating part dimensions before ordering and installation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature sealing systems, Food and beverage processing equipment, Pharmaceutical manufacturing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||