This high-quality Silicone Industrial O-Ring offers exceptional sealing performance in extreme temperatures and challenging chemical exposures. Its precise dimensions ensure a robust seal for critical industrial applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.160" |
| Outside Diameter | 0.215" |
| Cross Section | 0.078" |
Designed for demanding industrial environments, this Silicone O-Ring features an Inside Diameter of 4.160 inches, an Outside Diameter of 0.215 inches, and a Cross Section of 0.078 inches. Composed of premium polycarbonate silicone, it exhibits superior flexibility, excellent resistance to extreme temperatures (ranging from -60°C to +230°C), and robust defense against UV radiation and ozone. Its inherent biocompatibility and inertness make it suitable for food-grade and medical applications, while its resilience ensures long-term sealing integrity in pneumatic and hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from debris. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges or tools that could cause nicks or cuts. 3. Gently seat the O-ring into the groove, verifying it is properly positioned and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a damaged O-ring. | Inspect the O-ring for any nicks, cuts, or abrasions before installation. Replace if damaged. |
| Overstretching the O-ring during installation. | Stretch the O-ring only as much as necessary to clear the component. Excessive stretching can lead to premature failure. |
| Installing into a dirty or wet groove. | Always ensure the sealing groove is thoroughly cleaned and dried before placing the O-ring. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature sealing, Chemical processing equipment, Food and beverage machinery, Medical devices, Pneumatic and hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||