This high-performance industrial O-ring, crafted from premium silicone, ensures reliable sealing in demanding environments. Its precise dimensions provide exceptional sealing integrity against a wide range of fluids and gasses.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 8.439" |
| Outside Diameter | 10.485" |
| Cross Section | 0.129" |
A high-performance industrial component, this silicone O-ring boasts an inside diameter of 8.439 inches, an outside diameter of 10.485 inches, and a cross-section of 0.129 inches. Fabricated from high-grade silicone, it exhibits superior flexibility, excellent resistance to extreme temperatures (both high and low), and broad chemical compatibility, making it ideal for applications involving aggressive media or wide thermal fluctuations. Its robust material properties contribute to extended service life and reduced maintenance requirements in critical sealing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, free of debris, and properly dimensioned. 2. Lightly lubricate the O-ring with a compatible lubricant if necessary. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive stretching to prevent premature failure and leakage. |
| Using incompatible lubricants. | Always use lubricants specifically rated for silicone and the intended application environment. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: High-temperature sealing in ovens and furnaces, Chemical processing equipment, Aerospace and automotive fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||