This industrial-grade Silicone O-ring provides superior sealing in critical applications. Engineered for resilience and broad temperature resistance, it ensures reliable performance under demanding operational conditions.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 2.480" |
| Outside Diameter | 3.005" |
| Cross Section | 0.171" |
Built to exacting engineering tolerances, this Silicone O-ring features a precise inside diameter of 2.480 inches, an outside diameter of 3.005 inches, and a 0.171-inch cross-section. The inherent properties of silicone, including excellent flexibility, resistance to extreme temperatures (-55��C to +200°C), and good compression set, make it ideal for sealing in food processing, medical devices, and general industrial equipment where chemical inertness and hygiene are paramount. Its robust construction ensures long-term durability and effective containment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of any debris or sharp edges. 2. Carefully stretch or compress the O-ring as needed to fit within the groove, avoiding overstretching or twisting. 3. Seat the O-ring fully into the groove, confirming an even distribution around the circumference.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to stretching or tearing of the O-ring. | Apply gentle, even pressure and utilize appropriate tooling if necessary to avoid damaging the O-ring during installation. |
| Installing the O-ring into a contaminated or damaged groove. | Thoroughly inspect and clean the groove prior to installation to prevent leaks and premature O-ring failure. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Production, Automotive and Aerospace Sealing Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||