This robust industrial O-ring, crafted from premium 304 stainless steel, offers exceptional sealing performance. Its silicone composition ensures reliability across a wide temperature spectrum, making it ideal for critical applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 7.441" |
| Outside Diameter | 6.168" |
| Cross Section | 0.095" |
Designed for demanding industrial environments, this Silicone O-ring features a precise Inside Diameter of 7.441 inches and an Outside Diameter of 6.168 inches, with a 0.095-inch cross-section. The 304 stainless steel construction provides superior corrosion resistance and mechanical strength, ensuring long-term integrity in high-pressure and extreme temperature applications, including chemical processing, food and beverage, and pharmaceutical industries. Its inherent flexibility and resilience maintain a tight seal even under significant stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding any sharp tools that could cause nicks or cuts. 3. Apply a thin layer of compatible lubricant to the O-ring and groove if necessary for ease of installation and to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring for the groove. | Always verify O-ring dimensions against the gland design specifications to ensure a proper fit and seal. |
| Stretching or twisting the O-ring during installation. | Install the O-ring by gently placing it into the groove, minimizing stretching and avoiding twisting, which can compromise the seal. |
| Reusing old or damaged O-rings. | Always replace O-rings with new ones during maintenance or disassembly to guarantee seal integrity. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, High-temperature fluid systems, Food and beverage processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||