This industrial silicone O-ring provides reliable sealing in challenging environments. Manufactured to precise dimensions, it ensures a secure fit and consistent performance for critical fluid and gas containment.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.719" |
| Outside Diameter | 1.887" |
| Cross Section | 0.168" |
Built to exacting engineering tolerances, this silicone O-ring features an inside diameter of 1.719 inches, an outside diameter of 1.887 inches, and a cross-section of 0.168 inches. The high-grade silicone material offers exceptional flexibility across a broad temperature range, from -60°C to 230°C (-76°F to 446°F), and exhibits excellent resistance to weathering, ozone, and UV radiation. This makes it ideal for applications requiring long-term stability and integrity in medical, food processing, and general industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly dimensioned for the O-ring. 2. Lightly lubricate the O-ring and the groove with a compatible lubricant if necessary for easier installation and to prevent damage. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, to achieve a complete and even seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install the O-ring without excessive tension to prevent premature failure and leakage. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the mating groove for any imperfections before O-ring installation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices and Equipment, General Industrial Machinery and Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||