This robust seamless Nylon Schedule 40 pipe offers exceptional chemical resistance and durability. Engineered for demanding industrial environments, it ensures reliable fluid conveyance and long service life.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 4.2" |
| Outside Diameter | 1.482" |
| Wall Thickness | 0.170" |
Manufactured under strict quality controls, this 4.2" nominal size seamless Nylon pipe conforms to Schedule 40 dimensions. It features an actual outside diameter of 1.482 inches and a precise wall thickness of 0.170 inches, resulting in an internal diameter of 1.142 inches. Composed of high-grade Nylon, it exhibits excellent abrasion resistance, a high tensile strength, and superior resistance to a broad spectrum of chemicals, oils, and solvents. This makes it ideally suited for hydraulic systems, pneumatic lines, and chemical processing where integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement specifically designed for Nylon. 3. Insert pipe into fitting with a slight twist, ensuring full insertion. Hold for 30 seconds to set. 4. Allow adequate cure time before pressurizing the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using solvent cement not rated for Nylon. | Always use a solvent cement explicitly formulated for Nylon to ensure proper bonding and chemical compatibility. |
| Insufficient cure time before system operation. | Adhere to the manufacturer's recommended cure times for the solvent cement to achieve full joint strength before introducing pressure. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Chemical transfer lines, Industrial fluid conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||