Engineered for superior strength and reliability, this Schedule 80 seamless carbon steel pipe features a 3.130" outside diameter and 0.120" wall thickness, ensuring exceptional performance in high-pressure environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 5.7" |
| Outside Diameter | 3.130" |
| Wall Thickness | 0.120" |
Built to exacting engineering tolerances, this 5.7" nominal size Schedule 80 seamless pipe is manufactured from high-grade carbon steel, offering a minimum yield strength of 35,000 psi and tensile strength of 60,000 psi. The precise 3.130" outside diameter and 0.120" wall thickness conform to ASTM A106/A53 standards, guaranteeing structural integrity for critical fluid and gas conveyance systems operating under significant internal pressure and external stress. Its seamless construction eliminates the potential failure points associated with welded seams.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe end preparation, including beveling and cleaning. 2. Utilize appropriate welding procedures and filler materials for carbon steel, adhering to relevant ASME codes. 3. Install support systems at recommended intervals to prevent sagging and stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper weld joint preparation leading to incomplete fusion or porosity. | Thoroughly clean and bevel pipe ends to the specified angle, ensuring a clean surface free from contaminants before welding. |
| Incorrect support spacing causing excessive pipe stress and potential failure. | Consult piping stress analysis or industry standards for recommended support spacing based on pipe size, material, and fluid density. |
A: This Seamless Pipe, Schedule 80 is manufactured from Carbon Steel.
A: High-pressure fluid transmission, Oil and gas industry services, Chemical processing plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||