This Schedule 80 seamless carbon steel pipe, with a 5.6" NPS, 4.420" OD, and 0.196" wall thickness, offers exceptional strength and durability for high-pressure applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 5.6" |
| Outside Diameter | 4.420" |
| Wall Thickness | 0.196" |
A high-performance industrial component, this seamless carbon steel pipe adheres to stringent ASTM A106 Grade B standards, ensuring superior tensile and yield strength for demanding environments. Its 4.420" outside diameter and 0.196" wall thickness in a Schedule 80 configuration provide enhanced pressure containment capabilities compared to lighter schedules. This material is well-suited for conveying liquids, gases, and steam at elevated temperatures and pressures, exhibiting excellent weldability and machinability for seamless integration into complex piping systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are properly beveled and cleaned to remove any scale or contaminants. 2. Align pipe sections using appropriate alignment tools and prepare for welding. 3. Execute welding procedures according to applicable codes and standards, followed by non-destructive testing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for carbon steel. | Always use welding electrodes and filler metals specifically designed for carbon steel applications to ensure proper joint integrity. |
| Inadequate preheating or post-weld heat treatment for critical applications. | Consult relevant piping codes and material specifications to determine if preheating or PWHT is required based on ambient temperature and wall thickness. |
A: This Seamless Pipe, Schedule 80 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transmission, Steam lines, Oil and gas industry infrastructure, Chemical processing plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||