This Schedule 80 seamless carbon steel pipe, with a 4.2" outside diameter and 0.393" wall thickness, offers superior strength and reliability for critical, high-pressure industrial fluid transport.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 4.2" |
| Outside Diameter | 5.874" |
| Wall Thickness | 0.393" |
Purpose-built for heavy-duty applications, this 4.2" nominal size (5.874" actual OD) Schedule 80 seamless carbon steel pipe is engineered to withstand extreme pressures and mechanical stresses. Its 0.393" wall thickness provides exceptional integrity, making it ideal for demanding sectors like oil and gas, petrochemical, and heavy manufacturing. The inherent properties of carbon steel ensure robust performance in high-temperature and corrosive environments, offering a cost-effective solution for critical fluid conveyance systems requiring long-term durability and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe end preparation, including beveling according to welding specifications. 2. Align pipe sections accurately, maintaining dimensional tolerances. 3. Execute welding procedures strictly following ASME B31.3 or applicable codes, employing certified welders and approved consumables.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for carbon steel. | Always use welding consumables (electrodes, wire) specifically rated for the type and grade of carbon steel being joined. |
| Inadequate pipe end preparation leading to poor weld quality. | Thoroughly clean and properly bevel pipe ends to the specified angle and land for optimal weld penetration and fusion. |
A: This Seamless Pipe, Schedule 80 is manufactured from Carbon Steel.
A: High-pressure fluid transfer, Steam lines, Oil and gas pipelines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||