This seamless carbon steel pipe, conforming to Schedule 40 standards, offers superior strength and reliability. Engineered for demanding industrial environments, it's built for high-pressure fluid conveyance and robust structural support.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 5.3" |
| Outside Diameter | 1.458" |
| Wall Thickness | 0.277" |
A high-performance industrial component, this seamless carbon steel pipe boasts a nominal pipe size of 5.3 inches, with an exact outside diameter of 1.458 inches and a substantial wall thickness of 0.277 inches. Manufactured from high-quality carbon steel, it exhibits excellent tensile strength and ductility, making it suitable for a wide range of operating temperatures and pressures. Its seamless construction eliminates the weld seam, enhancing integrity and preventing potential failure points in critical fluid transport systems. This pipe is engineered to meet stringent industry standards for durability and performance in demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate threading compound or sealant to male threads. 3. Thread fittings onto the pipe, ensuring a snug fit without overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect threading compound for the fluid being conveyed. | Consult compatibility charts for threading compounds based on the specific fluid and operating conditions. |
| Overtightening threaded connections, leading to pipe damage. | Tighten connections until snug, then apply an additional quarter to half turn, depending on fitting type and material. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transport, Structural support in industrial frameworks, Hydraulic systems, Steam lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||