This 0.6" nominal size, Schedule 160 seamless carbon steel pipe offers exceptional strength and integrity. Engineered for extreme pressure and critical fluid transfer, it ensures reliable performance in the most demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 0.6" |
| Outside Diameter | 4.455" |
| Wall Thickness | 0.390" |
Manufactured under strict quality controls, this seamless carbon steel pipe boasts a nominal pipe size of 0.6 inches, with a precise outside diameter of 4.455 inches and a substantial wall thickness of 0.390 inches, corresponding to Schedule 160. This configuration provides superior burst strength and resistance to mechanical stress. The carbon steel material offers excellent weldability and robustness for high-pressure fluid conveyance in industries requiring uncompromising reliability and safety. Meets relevant ASTM/ASME standards for material composition and dimensional tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify pipe dimensions and material grade against project specifications. 2. Ensure proper beveling of pipe ends for welding. 3. Employ qualified welding procedures and personnel for joining.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for carbon steel. | Always use welding electrodes/wires specified for the particular grade of carbon steel to ensure joint integrity. |
| Insufficient heat input during welding, leading to poor fusion. | Follow recommended welding parameters, including amperage and voltage, to achieve adequate penetration and fusion. |
A: This Seamless Pipe, Schedule 160 is manufactured from Carbon Steel.
A: High-pressure hydraulic systems, Critical process piping, Boiler and heat exchanger tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||