This 3.2-inch Schedule 80 seamless carbon steel pipe offers superior strength and integrity for high-pressure fluid transfer and critical structural applications in demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 3.2" |
| Outside Diameter | 1.962" |
| Wall Thickness | 0.129" |
Manufactured under strict quality controls, this 3.2" nominal pipe size (NPS) seamless carbon steel pipe conforms to ASTM A53/A53M or equivalent standards. It features an actual outside diameter of 1.962 inches and a nominal wall thickness of 0.129 inches, resulting in a Schedule 80 designation. The carbon steel material provides excellent tensile strength and durability for moderate temperature and pressure applications, making it suitable for conveying liquids, gases, and steam in various industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of burrs, and properly beveled according to welding procedure. 2. Align pipe sections with appropriate fit-up for welding, maintaining centerline and joint preparation. 3. Execute welding in accordance with approved welding procedures and applicable codes, followed by post-weld inspection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe schedule for pressure requirements. | Always verify the required Schedule 40, 80, or higher based on system pressure and fluid characteristics. |
| Failure to properly clean pipe ends before welding. | Thoroughly clean the interior and exterior of pipe ends to remove contaminants that can lead to weld defects. |
A: This Seamless Pipe, Schedule 80 is manufactured from Carbon Steel.
A: High-pressure fluid conveyance (water, oil, gas), Structural supports and frameworks, Hydraulic systems and general piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||