This 1.6" NPS Schedule 40 seamless carbon steel pipe is engineered for robust performance in demanding industrial environments. Its seamless construction and precise wall thickness ensure superior integrity and reliability.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.6" |
| Outside Diameter | 2.466" |
| Wall Thickness | 0.387" |
A proven choice for industrial professionals, this 1.6" NPS Schedule 40 seamless carbon steel pipe boasts a nominal outside diameter of 2.466 inches and a substantial wall thickness of 0.387 inches. Manufactured from high-quality carbon steel, it offers excellent tensile strength and durability, making it suitable for a wide range of fluid and gas transport applications. Its seamless design eliminates weld seams, providing enhanced resistance to leaks and structural failures under high pressure and temperature conditions. This pipe meets stringent industry standards for reliability and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe end preparation, including beveling if required by welding procedure. 2. Align pipe sections accurately and secure with appropriate temporary supports. 3. Perform welding according to certified procedures, ensuring complete joint penetration and visual integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect pipe size or schedule for the intended pressure rating. | Always verify the service requirements and select a pipe size and schedule that meets or exceeds the specified pressure and temperature ratings. |
| Inadequate pipe end preparation leading to weld defects. | Ensure pipe ends are clean, free from mill scale, rust, and damage, and that beveling is performed to the exact specifications required for the welding process. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transfer systems, Boiler and heat exchanger tubing, Oil and gas pipelines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||