This seamless Schedule 40 carbon steel pipe, with a 0.9" nominal size and 2.555" outer diameter, offers superior integrity and durability for demanding industrial fluid conveyance systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 0.9" |
| Outside Diameter | 2.555" |
| Wall Thickness | 0.195" |
A high-performance industrial component, this seamless Schedule 40 pipe is manufactured from high-quality carbon steel, ensuring exceptional strength and corrosion resistance. With a specified 0.9" nominal pipe size (NPS), a precise outside diameter of 2.555 inches, and a robust wall thickness of 0.195 inches, it is engineered to withstand significant internal pressures and external stresses. This combination of dimensions and material properties makes it exceptionally well-suited for applications requiring reliable fluid or gas transport in sectors such as oil and gas, chemical processing, and general industrial manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from burrs or defects. 2. Align pipe sections precisely for welding or fitting. 3. Execute welds according to industry-accepted standards or install fittings using appropriate torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for carbon steel. | Employ preheating and post-weld heat treatment as recommended for the specific carbon steel grade and wall thickness to prevent cracking. |
| Over-tightening threaded fittings, leading to stress fractures. | Apply appropriate thread sealant and tighten fittings to the manufacturer's recommended torque to ensure a leak-free seal without damaging the pipe. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transmission lines, Structural support in industrial frameworks, Conduit for steam and process piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||