This Schedule 160 seamless carbon steel pipe, with a 5.4" outside diameter and 0.287" wall thickness, offers exceptional strength and reliability for high-pressure fluid transfer and structural applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 5.4" |
| Outside Diameter | 3.920" |
| Wall Thickness | 0.287" |
Manufactured under strict quality controls, this 5.4" seamless pipe boasts a 3.920" outside diameter and a robust 0.287" wall thickness, conforming to Schedule 160 specifications. Constructed from high-grade carbon steel, it exhibits superior tensile strength and yield strength, making it suitable for extreme operating conditions. Its seamless construction ensures leak-free performance and resistance to fatigue under cyclic loading, vital for critical systems. Material properties ensure excellent weldability and machinability for integration into complex piping networks.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify pipe dimensions and material grade against project specifications. 2. Prepare pipe ends using proper beveling techniques for welding. 3. Install using approved welding procedures and qualified personnel, ensuring proper alignment and support.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrectly matching pipe schedule to pressure requirements. | Always confirm the required Schedule rating based on the system's maximum operating pressure, temperature, and fluid properties. |
| Improper pipe end preparation leading to weld defects. | Ensure precise bevel angles and clean, burr-free pipe ends for optimal weld penetration and integrity. |
A: This Seamless Pipe, Schedule 160 is manufactured from Carbon Steel.
A: High-pressure hydraulic systems, Oil and gas transmission lines, Power generation steam lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||