This high-performance Schedule 160 seamless carbon steel pipe offers exceptional strength and durability. With a robust 0.368" wall thickness and 5.571" outer diameter for its 4.2" nominal size, it's engineered for extreme pressure environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 4.2" |
| Outside Diameter | 5.571" |
| Wall Thickness | 0.368" |
Built to exacting engineering tolerances, this seamless carbon steel pipe adheres to stringent industry standards for high-pressure service. Featuring a precise outside diameter of 5.571 inches and a substantial wall thickness of 0.368 inches for its 4.2-inch nominal pipe size (NPS), this Schedule 160 pipe provides superior burst strength and structural integrity. The carbon steel composition ensures excellent weldability and mechanical properties suitable for demanding industrial processes, hydraulic systems, and power generation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe preparation, including deburring and cleaning of ends. 2. Utilize compatible welding procedures and consumables for carbon steel. 3. Perform non-destructive testing (NDT) as per project specifications to verify weld integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for high-pressure carbon steel. | Consult relevant ASME or AWS codes and use qualified welding procedures and certified consumables for the specific carbon steel grade and service conditions. |
| Inadequate pipe end preparation leading to weld defects. | Properly chamfer, deburr, and clean pipe ends to ensure full penetration welds and prevent slag inclusions or porosity. |
A: This Seamless Pipe, Schedule 160 is manufactured from Carbon Steel.
A: High-pressure hydraulic systems, Oil and gas transmission lines, Chemical processing plants, Power generation steam lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||