Engineered for extreme operational demands, this Schedule 160 seamless carbon steel pipe offers superior integrity and performance in critical, high-pressure environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.3" |
| Outside Diameter | 5.860" |
| Wall Thickness | 0.246" |
Purpose-built for heavy-duty applications, this 3.3" seamless carbon steel pipe boasts an outside diameter of 5.860" and a robust wall thickness of 0.246". Manufactured from high-grade carbon steel, it provides exceptional tensile strength and resistance to internal and external pressures, making it suitable for conveying hazardous or high-temperature fluids. Its seamless construction eliminates weld defects, ensuring uniform strength and minimizing leak potential in demanding industrial processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify pipe dimensions and material specifications against project requirements. 2. Ensure mating flanges and fittings are compatible and properly prepared. 3. Install using approved welding procedures or appropriate mechanical joining methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for carbon steel. | Always use welding consumables specifically rated for the carbon steel grade and intended service conditions. |
| Inadequate preheating or post-weld heat treatment on thicker sections. | Consult welding procedure specifications for required preheat and PWHT based on material thickness and ambient temperature. |
A: This Seamless Pipe, Schedule 160 is manufactured from Carbon Steel.
A: High-pressure hydraulic systems, Oil and gas transmission lines, Chemical processing plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||