This Schedule 80 seamless brass pipe offers superior strength and corrosion resistance. Precisely manufactured to 4.1" nominal size with a 4.991" OD and 0.455" wall thickness, it's engineered for critical fluid and gas conveyance.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 4.1" |
| Outside Diameter | 4.991" |
| Wall Thickness | 0.455" |
Built to exacting engineering tolerances, this seamless brass pipe features a 4.1" nominal pipe size, a precise 4.991" outside diameter, and a robust 0.455" wall thickness, meeting Schedule 80 requirements. Composed of C36000 free-machining brass alloy, it exhibits excellent machinability and inherent resistance to a wide range of corrosive media, including water, mild acids, and various industrial chemicals. This combination of dimensional integrity and material properties makes it suitable for high-pressure applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe support and alignment. 2. Clean pipe ends thoroughly to remove any debris or burrs. 3. Use appropriate joining methods (e.g., threading, brazing, or specialized fittings) as dictated by system pressure and media.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect joining methods for the pressure rating. | Verify that the chosen joining method (threading, brazing, welding, etc.) is rated for Schedule 80 pressure and the specific fluid or gas being conveyed. |
| Inadequate pipe support leading to stress concentrations. | Install adequate pipe hangers and supports at prescribed intervals to prevent sag and minimize stress on the pipe, especially in longer runs. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure fluid transfer systems, Industrial chemical conveyance, Hydraulic and pneumatic lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||