This Schedule 160 seamless brass pipe offers superior strength and corrosion resistance. Precision manufactured to exacting standards, it's ideal for high-pressure fluid transfer and demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 2.6" |
| Outside Diameter | 1.810" |
| Wall Thickness | 0.485" |
Manufactured under strict quality controls, this 2.6" nominal pipe size (NPS) seamless brass pipe features an actual outside diameter (OD) of 1.810" and a substantial wall thickness of 0.485". This configuration results in an internal diameter (ID) of 0.840", creating a Schedule 160 rating that signifies exceptional pressure handling capabilities. Brass's inherent properties, including excellent corrosion resistance to a wide range of fluids and good thermal conductivity, make this pipe suitable for hydraulic systems, chemical processing, and high-purity fluid applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect pipe ends for damage and cleanliness. 2. Prepare mating surfaces according to fitting manufacturer's specifications (e.g., deburring, chamfering). 3. Assemble pipe and fitting using appropriate joining method (e.g., brazing, threading, compression) ensuring proper alignment and secure connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard pipe cutting tools on brass, leading to deformation. | Utilize sharp, dedicated brass or non-ferrous pipe cutters to ensure clean, burr-free cuts. |
| Over-tightening threaded connections, causing stress fractures. | Apply thread sealant and tighten connections to the manufacturer's recommended torque specifications. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure hydraulic systems, Chemical processing and transfer, Instrumentation and control lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||