This Schedule 160 seamless brass pipe offers exceptional strength and corrosion resistance. Its robust construction ensures reliable performance in high-pressure fluid handling and critical industrial applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 4.7" |
| Outside Diameter | 1.333" |
| Wall Thickness | 0.146" |
Engineered for reliability and performance, this seamless brass pipe is manufactured to stringent standards. Featuring a nominal pipe size of 4.7 inches, it boasts an actual outside diameter of 1.333 inches and a substantial wall thickness of 0.146 inches, corresponding to Schedule 160. Brass's inherent corrosion resistance makes this pipe suitable for a wide range of corrosive media, while the seamless construction eliminates potential leak paths common in welded pipes, ensuring integrity under demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate thread sealant or tape to the male threads. 3. Hand-tighten the fitting, then use a wrench for the specified tightening torque, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible thread sealant with brass fittings. | Always use sealants specifically rated for brass to prevent chemical degradation and ensure a secure seal. |
| Overtightening fittings, which can crack the brass. | Follow recommended torque specifications for brass fittings to avoid material fatigue and failure. |
A: This Seamless Pipe, Schedule 160 is manufactured from Brass.
A: High-pressure hydraulic systems, Corrosive fluid transfer in chemical processing, Instrumentation and control lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||