This 1.2" Schedule 80 seamless brass pipe offers superior corrosion resistance and durability. Engineered for demanding applications, its robust construction ensures reliability under pressure and in challenging fluid environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.2" |
| Outside Diameter | 5.871" |
| Wall Thickness | 0.220" |
Precision-manufactured to tight tolerances, this seamless brass pipe adheres to Schedule 80 dimensions, featuring a nominal size of 1.2 inches, an outside diameter of 5.871 inches, and a substantial wall thickness of 0.220 inches. Constructed from high-quality brass alloys, it exhibits excellent machinability, good thermal conductivity, and superior resistance to a wide range of corrosive media, including saltwater, mild acids, and alkaline solutions. This makes it an ideal choice for applications demanding longevity and performance in aggressive service conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to male threads. 3. Carefully thread the pipe into the fitting, hand-tightening initially. 4. Use a pipe wrench to tighten an additional 1-2 turns, avoiding over-tightening to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to cracking or deformation of the pipe or fitting. | Tighten fittings firmly but do not overtighten. Refer to fitting manufacturer guidelines for torque specifications if available. |
| Failing to properly clean threads, resulting in a poor seal and potential leaks. | Thoroughly clean all threads on both the pipe and fitting before applying sealant or tape. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Marine and offshore fluid transfer systems, Industrial processing equipment, High-pressure hydraulic lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||