This Schedule 40 seamless brass pipe offers superior corrosion resistance and durability. Its precise dimensions ensure reliable performance in demanding industrial and commercial fluid transfer systems.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.1" |
| Outside Diameter | 4.630" |
| Wall Thickness | 0.207" |
Trusted by engineers across multiple sectors, this seamless brass pipe adheres to stringent Schedule 40 specifications. With a nominal pipe size of 1.1 inches, it features an actual outside diameter of 4.630 inches and a substantial wall thickness of 0.207 inches. Brass's inherent machinability, excellent corrosion resistance to a wide range of fluids including water, mild chemicals, and certain petroleum products, and good thermal conductivity make it an ideal choice for applications requiring both structural integrity and resistance to environmental degradation. This pipe is engineered for reliable performance in pressure piping systems and fluid conveyance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to male threads. 3. Tighten fittings securely, avoiding overtightening to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect thread sealant for brass fittings. | Always use sealants specifically rated for brass or compatible with brass alloys to prevent galvanic corrosion. |
| Overtightening threaded connections. | Hand-tighten fittings plus the specified number of turns (refer to fitting manufacturer's guidelines) to ensure a seal without stressing the brass. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Fluid conveyance systems (water, gas, mild chemicals), Structural components requiring corrosion resistance, Heat exchanger tubing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||