This premium Seamless Aluminum 6061 Schedule 80 pipe offers exceptional strength and corrosion resistance. Engineered for critical applications, it ensures reliable fluid conveyance and structural support.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 4.4" |
| Outside Diameter | 1.419" |
| Wall Thickness | 0.349" |
Specified by design engineers worldwide, this Aluminum 6061 Schedule 80 seamless pipe provides superior performance. Featuring a nominal pipe size of 4.4 inches, an outside diameter of 1.419 inches, and a robust wall thickness of 0.349 inches, it meets stringent ASME B31.3 standards. The 6061 aluminum alloy offers an excellent balance of strength, weldability, and corrosion resistance, making it suitable for high-pressure systems, marine environments, and structural components where weight and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe preparation, including deburring and cleaning of cut ends. 2. Utilize appropriate welding procedures and filler materials for Aluminum 6061, adhering to ASME Section IX standards. 3. Perform hydrostatic or pneumatic testing as per design specifications to verify system integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for Aluminum 6061. | Always use recommended filler metals such as ER4043 or ER5356, as specified by welding codes or engineering drawings. |
| Inadequate pre-cleaning of the pipe ends. | Thoroughly clean the pipe ends with a stainless steel wire brush and degreaser to remove oxides, dirt, and any contaminants that could compromise weld quality. |
A: This Seamless Pipe, Schedule 80 is manufactured from Aluminum 6061.
A: High-pressure fluid transfer systems, Structural components in corrosive environments, Marine and offshore applications, Aerospace and automotive fluid lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||