This seamless Aluminum 6061 Schedule 40 pipe offers excellent corrosion resistance and a high strength-to-weight ratio. Precisely manufactured for reliable fluid conveyance and structural integrity in demanding environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 4.5" |
| Outside Diameter | 4.779" |
| Wall Thickness | 0.124" |
Specified by design engineers worldwide, this seamless pipe is manufactured from Aluminum Alloy 6061, renowned for its excellent weldability, strength, and corrosion resistance. The 4.5" nominal pipe size translates to an actual outside diameter of 4.779", with a precisely controlled wall thickness of 0.124". This combination meets Schedule 40 dimensional standards, ensuring compatibility with standard fittings and providing a balance of flow capacity and structural performance for various industrial and commercial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from burrs or damage. 2. Apply appropriate solvent cement to both the pipe end and the fitting socket, following manufacturer's instructions. 3. Insert the pipe into the fitting with a slight twisting motion, ensuring full insertion. 4. Hold firmly for the recommended set time to allow the cement to cure sufficiently.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of primer or cement for aluminum. | Always use a primer and solvent cement specifically formulated for aluminum pipe and fittings. Consult the cement manufacturer's compatibility chart. |
| Insufficient curing time before putting the system under pressure. | Adhere strictly to the set and cure times recommended by the solvent cement manufacturer. Rushing the process can lead to joint failure. |
A: This Seamless Pipe, Schedule 40 is manufactured from Aluminum 6061.
A: Fluid transfer systems (water, air, non-corrosive chemicals), Structural components in marine and aerospace industries, Heat exchangers and conduit protection.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||