This Schedule 160 seamless pipe, crafted from Aluminum 6061, offers exceptional strength and corrosion resistance. Engineered for critical pressure and structural applications requiring superior performance.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 5.4" |
| Outside Diameter | 2.371" |
| Wall Thickness | 0.229" |
Manufactured under strict quality controls, this seamless pipe boasts a 5.4" nominal pipe size (NPS) and an outside diameter (OD) of 2.371". The substantial 0.229" wall thickness, indicative of Schedule 160, ensures superior pressure containment and structural integrity. Fabricated from Aluminum 6061, it exhibits excellent strength-to-weight ratio, good weldability, and resistance to general corrosion, making it suitable for demanding environments in aerospace, marine, and high-pressure fluid transfer systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe support and alignment to prevent stress concentrations. 2. Utilize appropriate welding procedures and filler materials for Aluminum 6061, adhering to industry standards. 3. Perform thorough leak testing and inspection before putting the system into service.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper welding of aluminum alloys can lead to reduced strength and porosity. | Always use certified welders and follow recommended procedures for Aluminum 6061, including proper cleaning and shielding gas. |
| Over-tightening fittings can cause deformation of the pipe's OD or ID. | Torque fittings according to manufacturer specifications, using calibrated tools, to avoid damage to the pipe. |
A: This Seamless Pipe, Schedule 160 is manufactured from Aluminum 6061.
A: High-pressure hydraulic systems, Aerospace structural components, Marine fluid transfer lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||