This Schedule 80 seamless aluminum pipe, crafted from robust 6061 alloy, offers exceptional strength and corrosion resistance. Its precise dimensions ensure a reliable fit for critical fluid and gas transfer systems in demanding environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 4.6" |
| Outside Diameter | 5.279" |
| Wall Thickness | 0.437" |
A high-performance industrial component, this seamless pipe is manufactured from Aluminum 6061, a precipitation-hardened alloy known for its excellent strength-to-weight ratio, corrosion resistance, and weldability. The Schedule 80 designation signifies a thicker wall (0.437 inches) compared to standard pipes, enhancing its pressure-handling capabilities. With an inside diameter of 4.6 inches and an outside diameter of 5.279 inches, this pipe is engineered for robust performance in moderate to high-pressure fluid conveyance, structural applications, and chemical processing where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate sealant or tape to the male threads. 3. Tighten connections to manufacturer's recommended torque specifications, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings for aluminum pipe. | Always utilize fittings specifically designed for aluminum pipe to ensure proper sealing and prevent galvanic corrosion. |
| Over-tightening threaded connections. | Refer to torque charts for aluminum fittings and use a calibrated torque wrench to prevent thread damage and seal failure. |
A: This Seamless Pipe, Schedule 80 is manufactured from Aluminum 6061.
A: Fluid and gas transfer in chemical processing plants, Structural components in marine and aerospace industries, Hydraulic and pneumatic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||