This Schedule 160 seamless aluminum pipe, crafted from durable 6061 alloy, offers exceptional strength and corrosion resistance. Its precise dimensions make it ideal for critical fluid and gas conveyance in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.1" |
| Outside Diameter | 1.756" |
| Wall Thickness | 0.337" |
Engineered for reliability and performance, this seamless pipe is manufactured from Aluminum Alloy 6061, known for its excellent strength-to-weight ratio, weldability, and resistance to corrosion. With an outside diameter of 1.756 inches and a substantial wall thickness of 0.337 inches, it achieves a Schedule 160 rating, signifying robust pressure handling capabilities. The 3.1-inch nominal pipe size ensures compatibility with a wide range of fittings and systems. This pipe is suitable for applications demanding structural integrity and resistance to moderate pressures and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces of the pipe and fitting are clean and free from debris. 2. Apply appropriate sealant or thread tape to the male threads of the fitting. 3. Thread the fitting onto the pipe hand-tight, then use a wrench to tighten an additional 1-2 turns, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings with aluminum pipe. | Always use fittings specifically designed for aluminum pipe to prevent galvanic corrosion and ensure proper sealing. |
| Over-tightening threaded connections. | Hand-tighten then use a wrench for a limited additional turn (1-2 turns) to avoid damaging the threads or pipe. |
A: This Seamless Pipe, Schedule 160 is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic conveyance, Structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||