This Schedule 160 seamless pipe, crafted from high-strength Aluminum 6061, offers exceptional durability and corrosion resistance. Its precise dimensions ensure superior performance in critical fluid transfer and structural applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 3.7" |
| Outside Diameter | 1.985" |
| Wall Thickness | 0.305" |
Trusted by engineers across multiple sectors, this Seamless Pipe, Schedule 160, is fabricated from Aluminum 6061, renowned for its excellent strength-to-weight ratio and weldability. With an outside diameter of 1.985 inches and a substantial wall thickness of 0.305 inches, its nominal pipe size is 3.7 inches. This specification results in a robust conduit ideal for high-pressure systems, structural components, and applications requiring resistance to corrosive environments. Its seamless construction guarantees uniform wall thickness and enhanced integrity under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe cleaning and deburring. 2. Verify compatibility of fittings and welding procedures for Aluminum 6061. 3. Execute welds according to industry best practices for aluminum alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding filler material for Aluminum 6061. | Consult AWS A5.10 or manufacturer recommendations for appropriate filler alloys (e.g., 4043 or 5356). |
| Inadequate preparation of the pipe ends, leading to poor weld quality. | Thoroughly clean the pipe ends with a stainless steel wire brush and degreaser prior to welding. |
A: This Seamless Pipe, Schedule 160 is manufactured from Aluminum 6061.
A: Aerospace fluid lines, Marine structural components, High-pressure hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||