This robust polycarbonate U-bolt is engineered for secure and corrosion-resistant support of 4" diameter piping. Its high-strength polymer construction ensures longevity in demanding industrial environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.08" |
| Inside Length ( B) | 3.14" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this 4" pipe U-bolt is precision-molded from advanced polycarbonate, offering superior chemical resistance and dielectric properties. The internal dimensions are precisely controlled with an Inside Width (A) of 1.08 inches and an Inside Length (B) of 3.14 inches, ensuring a snug fit for 4" nominal pipe. It features a standard 1/2"-13 UNC thread size, compatible with common fastening hardware. This material choice eliminates concerns about galvanic corrosion and makes it ideal for applications where electrical conductivity must be avoided or where exposure to aggressive chemicals is prevalent.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 4" pipe. 2. Insert the threaded legs through the mounting surface or bracket. 3. Securely fasten using appropriate washers and nuts, tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, which can stress the polycarbonate material. | Tighten nuts to the recommended torque specification to prevent material deformation or cracking. |
| Using metal hardware that can cause galvanic corrosion with the polycarbonate. | Always use compatible stainless steel or other non-corrosive washers and nuts with polycarbonate U-bolts. |
A: This Polycarbonate U-Bolt, 4" Pipe is manufactured from Polycarbonate.
A: Chemical processing piping support, Marine and offshore installations, Electrical conduit and cable management.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||