Engineered for demanding environments, this 4" Polycarbonate U-Bolt offers superior corrosion resistance and electrical insulation. Its robust construction ensures reliable pipe support in diverse industrial settings.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 3.23" |
| Inside Length ( B) | 6.76" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this 4" Polycarbonate U-Bolt (Part Number: [Insert Part Number Here]) features an Inside Width (A) of 3.23 inches and an Inside Length (B) of 6.76 inches. The U-bolt is manufactured from high-strength, UV-stabilized polycarbonate, providing excellent chemical resistance, non-conductivity, and impact strength. The integrated threads are 1/2"-13 UNC, allowing for secure fastening with standard nuts and washers. This design is ideal for supporting fluid conveyance systems, conduit, and structural elements where galvanic corrosion or electrical interference is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 4" pipe, ensuring proper alignment with mounting surfaces. 2. Insert the threaded legs through the designated mounting holes or brackets. 3. Securely fasten the U-bolt using appropriate 1/2"-13 nuts and washers (sold separately), tightening evenly on both sides to achieve the desired clamping force without over-stressing the polycarbonate. 4. Verify that the pipe is securely supported and the U-bolt is not experiencing excessive deflection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the U-bolt, leading to stress cracking of the polycarbonate. | Tighten nuts until snug, then apply an additional 1/4 to 1/2 turn. Use a torque wrench if precise torque values are critical for the application. |
| Using metal washers directly against the polycarbonate without a cushioning layer, potentially causing localized pressure points. | Utilize rubber or neoprene washers between the polycarbonate and metal washers to distribute load and prevent surface damage. |
A: This Polycarbonate U-Bolt, 4" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Water and wastewater treatment facilities, Marine and offshore installations, Electrical conduit support, Food and beverage processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||