Engineered from high-strength polycarbonate, this U-bolt offers superior corrosion resistance for 2" pipe applications. Its robust design ensures reliable support and longevity in challenging environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 1.38" |
| Inside Length ( B) | 2.61" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this Polycarbonate U-Bolt is designed for secure fastening of 2" nominal pipe. Featuring an Inside Width (A) of 1.38" and an Inside Length (B) of 2.61", it provides a precise fit. The 1/2"-13 thread size ensures compatibility with standard hardware. Polycarbonate's inherent resistance to a wide range of chemicals, UV radiation, and moisture makes this U-bolt an excellent choice for applications where metal fasteners would degrade or cause galvanic corrosion. Its non-conductive properties also offer an added layer of safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it is centered. 2. Insert the threaded legs through the mounting surface or bracket. 3. Securely fasten using the appropriate nuts and washers (not included), tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can stress the polycarbonate material. | Tighten nuts until snug, then an additional 1/4 to 1/2 turn to ensure a secure fit without deforming the U-bolt. |
| Using metal washers that could scratch or damage the polycarbonate surface. | Utilize plastic or nylon washers to protect the polycarbonate material during installation. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plants, Wastewater treatment facilities, Marine environments, Food and beverage industry piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||