This robust polycarbonate U-bolt is engineered for secure 2" pipe support in harsh industrial settings. Its non-conductive, corrosion-resistant material ensures longevity and safety in challenging applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 4.86" |
| Inside Length ( B) | 6.39" |
| Thread Size | 1/2"-13 |
Designed for demanding industrial environments, this U-bolt is constructed from high-strength polycarbonate, offering exceptional resistance to chemicals, UV radiation, and extreme temperatures. With an inside width (A) of 4.86 inches and an inside length (B) of 6.39 inches, it provides a secure fit for 2" nominal pipe sizes. The 1/2"-13 UNC thread size ensures compatibility with standard hardware, making it suitable for a wide range of pipe mounting, conduit support, and structural fastening where corrosion and electrical conductivity are primary concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe. 2. Place the pipe and U-bolt against the mounting surface. 3. Secure the U-bolt by threading the nuts onto the bolt legs.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can stress the polycarbonate material. | Tighten nuts to snug, then an additional quarter to half turn. Avoid excessive force; torque wrenches are recommended for consistent results. |
| Using the U-bolt in applications exceeding its temperature or chemical resistance limits. | Verify the specific chemical and temperature compatibility for your application before installation. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing plant pipe support, Marine and offshore conduit mounting, Wastewater treatment facility infrastructure.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||