Engineered for demanding environments, this Polycarbonate U-Bolt offers superior corrosion resistance and electrical insulation for secure 2" pipe support. Its robust design ensures long-term performance in corrosive or electrically sensitive applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 3.82" |
| Inside Length ( B) | 5.99" |
| Thread Size | 1/2"-13 |
A high-performance industrial component, this 2" pipe U-Bolt is precision-molded from advanced polycarbonate, offering exceptional strength, impact resistance, and broad chemical compatibility. The internal dimensions are engineered for a precise fit, with an Inside Width (A) of 3.82 inches and an Inside Length (B) of 5.99 inches, accommodating standard 2-inch nominal pipe. The U-bolt features a robust 1/2"-13 UNC thread size for secure fastening with appropriate nuts and washers (sold separately). Its non-conductive properties make it ideal for applications where electrical isolation is critical, and its inherent corrosion resistance eliminates the risk of rust or degradation common with metallic fasteners. Operating temperature range is -40°F to 250°F (-40°C to 121°C).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it rests evenly on the pipe's exterior. 2. Insert the threaded legs through the mounting surface or clamping mechanism. 3. Securely fasten the U-bolt by tightening the nuts onto the threaded legs, applying even torque to both sides to prevent pipe distortion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can cause stress fractures in the polycarbonate. | Tighten nuts to the manufacturer's recommended torque specification for polycarbonate, or hand-tighten and then give a quarter to half turn for secure fastening, avoiding excessive force. |
| Using metal nuts and washers that can scratch or damage the polycarbonate, especially under vibration. | Utilize compatible plastic or coated metal nuts and washers to maintain the integrity of the polycarbonate surface and prevent galvanic corrosion if dissimilar metals are used. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Chemical processing pipe support, Water and wastewater treatment systems, Electrical conduit and cable tray support, Marine and offshore applications, Food and beverage processing lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||