Engineered for robust and non-conductive pipe support, this 2" Polycarbonate U-Bolt offers superior corrosion resistance. Ideal for demanding environments where metal is unsuitable, ensuring long-term structural integrity.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 2.47" |
| Inside Length ( B) | 2.84" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-bolt is constructed from high-impact, UV-stabilized polycarbonate, providing excellent chemical and weather resistance. The dimensions are precisely engineered for a secure fit: an inside width (A) of 2.47 inches and an inside length (B) of 2.84 inches, accommodating standard 2-inch nominal pipes. It features robust 1/2"-13 UNC threads, compatible with standard nuts and washers, ensuring a reliable fastening solution for various industrial and commercial applications where electrical insulation and corrosion prevention are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe or conduit, ensuring it is centered. 2. Insert the threaded legs through the mounting surface or bracket. 3. Securely fasten with appropriate nuts and washers, tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can stress the polycarbonate material. | Tighten nuts until snug, then an additional 1/4 turn. Avoid excessive force. Use a torque wrench if precise torque is critical. |
| Using the incorrect size U-bolt for the pipe diameter. | Always verify the 'pipe size' corresponds to the U-bolt's intended fit, checking inside dimensions against nominal pipe O.D. and wall thickness. |
A: This Polycarbonate U-Bolt, 2" Pipe is manufactured from Polycarbonate.
A: Conduit and cable support in corrosive environments, Plumbing and piping in food processing facilities, Electrical grounding rod and pipe securing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||